22mm Collar-Sleeve for Rotisserie Skewer by Flaming Coals

Model: 22BUSH

A stainless steel collar-sleeve for rotisserie skewer use, this Flaming Coals collar bush is made to suit a 22mm round skewer. Fit it to your spit and it stops the skewer from moving side to side while it turns.

 Suitable for:

• Spit rotisseries running a 22mm round skewer
• Stopping a skewer from sliding side to side during a cook
• Replacing a lost or worn collar on a 22mm round skewer

 Why spit roasters choose this collar-sleeve

• Sized for 22mm round skewers
• Stops the skewer moving from side to side
• Made from stainless steel
• Locks in place with a standard M8 bolt (not included)
• A small, low-cost spare part that keeps your spit running properly

Ideal for anyone with a 22mm round skewer who wants it to stay put from the first turn to the last.

 A collar-sleeve for rotisserie skewer stability

A skewer that wanders sideways is a nuisance. It can shift your meat off centre over the coals and leave you nudging it back into place when you would rather be looking after the fire. That is exactly what a collar-sleeve for rotisserie skewer use is for: it gives the skewer a fixed stop, so it keeps turning in the same spot.

• 22mm round fit: made to suit a 22mm round skewer, so check your skewer diameter before ordering.
• Side to side control: holds the skewer in position so it does not slide along its length while the spit turns.

 Stainless steel and simple to fit

There is not much to this part, and that is the point. It is a stainless steel collar that tightens onto the skewer with a single bolt, so fitting or moving it takes a moment.

• Stainless steel construction: suited to life around heat, smoke and the odd wash-down after a cook.
• M8 bolt fixing: uses an M8 bolt to lock the collar onto the skewer. The bolt is not included, so have one ready.

 Specifications

 Frequently asked questions

What size skewer does this collar-sleeve fit?

It is made to suit a 22mm round skewer. Measure the diameter of your skewer before ordering to make sure it matches.

Does it come with a bolt?

No. The collar-sleeve needs an M8 bolt to lock it in place, and the bolt is not included.

What does a skewer collar actually do?

It stops the skewer from moving side to side, so the skewer stays in position while the spit is turning.

What is it made from?

Stainless steel.

My skewer is 28mm. Will this fit?

No, this one is for 22mm round skewers. For a larger skewer, have a look at the 28mm (1 inch) Collar for Rotisserie Skewer by Flaming Coals.

Can I return it if it does not suit my spit?

Yes. We offer 60-day change of mind returns. See our Shipping and Returns Policy for the details.